Raw Mill
Product Characteristics
 
 °Ů  Simply process, Mill, Drying and Classification at the meantime .
 
 
 °Ů  Less Area Occupation, Compact layout, Less Equipment Weight and Low Investment of civil works.
 
 °Ů  High grinding efficiency and low power consumption
 
 °Ů  Less metal consumption per unit of product. the service life of grinding parts exceeds 8000 hours , and can be easily repaired.
 
 °Ů  Wearing on roller and liner makes little effect on the output (within 5%).
 
 °Ů  Each roller is relatively independent to make pressure and crush the materials on the millstone and it can be implemented part of the work, such as it can reach 70% of rated output when two rolls of the four-roll mill work.
 
 °Ů  Separation parts combined with high dynamic and static binding cage separator, raw material fineness control high precision, sensitivity adjustment, the raw material fineness R80μm=10~15%£¨R200μm=1.0%°£
 
 °Ů  Strong drying power. By using exhaust gas from kiln , raw material of 7% moisture can be dried. While raw material of 20% moisture can be dried if auxiliary heat source is used.
 
 °Ů  Grinding with material bed. Low noise, negative pressure operation, less dust pollution.
 
Vertical Raw Mill Data Sheet
Type Dia of Table
(mm)
Installation Power
(kw)
Benchmark Capacity
(t/h)
Max. Feeding Size
(mm)
Capacity Range
(t/h)
TRMR56.4 5600 4500 480 80 400~550
TRMR53.4 5300 4000 400 80 330~510
TRMR45.4 4500 3350 350 80 300~400
TRMR42.4 4200 2800 280 80 230~330
TRMR40.4 4000 2500 250 80 200~300
TRMR38.4 3800 2240 220 80 185~280
TRMR36.4 3600 2000 200 80 170~260
TRMR31.3 3100 1250 120 40 90~150
TRMR25.2 2500 800 75 40 60~90
TRMR17.2 1700 220 25 40 22~33
TRMR14.2 1400 150 15 40 13~20
°° NOTES: Feed Moisture7%(to be dried preheater hot gas); Final Products Moisture0.5%; Fineness R80 µm=12%~18%; Grindability of Raw Material TMF=0.7~1.2;Feed Size Refers to Particle Size of 95% Throughput