Ball Mill
 

 

Product Characteristics
 
°ŮDesired Adaptability to Various Material
 
°ŮLow Fault Rate
 
°ŮHigh Drying Ability and Low Gas Leakage Coefficient
 
°ŮUtilization of Exhaust Gas from Preheater to Minimize Heat Consumption When the Ball Mill is used for Raw Materials or Coal Grinding.
 
°ŮSimple Process, Safe and Reliable Operation
 
°ŮIt can be widely used in cement industry, mining, electric power plant and ceramics, etc.
 
°ŮIt can provide a set of well solution for cement plant raw material, cement clinker and the coal powder.
 
°ŮThe unilateral tube mill with four slide shoes manufactured by our company won the national patent product, patent number CN2870979Y.
 
 
Structural Features
 
°ŮGas and material are fed into mill separately by the special mechanism to enhance the drying effect.
 
°ŮWear resistant liners are installed in the drying department to protect the shell of mill.
 
°ŮThe lifting plates, made of wear resistant alloy, are fixed on the shell of drying department by bolts for easy replacement.
 
°ŮThe Cantilever type drying department helps to minimize dimensions and weight of mill body consequently, to ease transportation,
 
°ŮThe solid seat of slide shoes bearing support, showing a creative design.
 
°ŮEasy installation, adjustment and maintenance
 
°ŮDesired sealing of slide shoes bearing ensures the clean environment of workshop.
 
°ŮSlide shoes bearing is lubricated by high pressure lubrication station. It has simple arrangement and easy maintenance.
 
 

Raw Mill (Ball Mill) Technical Parameter 

 

 

Model Drive Manner Outlet Mode Silo Amount Rotary Speed
(r/min)
Capacity
(t/h)
Feed Size
(mm)
Product Fineness
&
Screen Residue
Main Motor Power
(kW)
Φ3.8×8.5+2m Edge Air Swept 1+1 16.26 90~100 25 90µm,12%~14% 1600
Φ4.2×7.5+3.5m Edge Air Swept 1+1 15.6 100~113 30 90µm,12% 2000
Φ4.6×8.5+3m Center Middle Discharge 2 15 160 30 90µm,12% 2800
Φ4.6×8.5+3.5m Center Middle Discharge 2 15 150 30 80µm,12%~14% 3000
Φ4.6×14m Edge End Discharge 2 15 185 30 90µm,12% 4000
Φ4.8×11+2m Edge End Discharge 3 14.78 190 25 90µm,10% 4200
Φ5×10.965 Center °° 2 14.5 225 25 90µm,10% °°
Φ5×13.99 Center °° 2 14.5 225 °° 90µm,10% °°
Φ5×10.5+3m Edge Air Swept 2 14.4 210 25 90µm,10% 3800
        

Cement Mill (Ball Mill) Technical Parameter

 

Model Drive Manner Silo Amount Rotary Speed
r/min
Capacity
t/h
Feed Size
mm
Product Fineness
80µm
cm²/g
Main Gearbox Speed Ratio Main Motor Power
kW
Φ2.4×13m Edge 4 28.8 23~25 25 3000 6.3 800
Φ2.6×13m Edge 3 19.15 26~28 25 3200 4.5 1000
Φ3×11m Edge 2 18.64 47 15 3300 6.33 1250
Φ3×12.5m Edge 2 17.9 38~42 15 3400 5.6 1400
Φ3.2×10.5m Center 2 17.71 35 30 3400 41.69 1400
Φ3.2×13m Center 3 17.8 50 30 3300 5.6 1600
Φ3.4×12.055m Edge 2+1 17.3 35~45 20 4300~5300 7.1 1800
Φ3.8×13m Center 2 16.6 130equiped with roller press 2 3650 44.7 2500
Φ4×13m Center 2 16.3 75 25 3400 44.7 2500
Φ4.2×13m Center 2 15.6 90 20 3400 47.76 3550
Φ4.2×13.3m Center 2 15.6 80 20 3400 47.76 3400
Φ4.2×13.6m Center 2 15.6 80 20 3400 47.76 3400
Φ4.2×14m Center 1 15.6 175 20 3400 47.76 3800
Φ4.2×14m Center 2 15.6 60 20 4800 47.76 3800
Φ4.2×14.5m Edge 2 15.6 100 30 3600 47.76 3800
Φ4.4×15.1m Center 2 15.1 110~115 30 3500 49.34 4200
Φ4.6×13m Center 2 14.9 110 20 3400 49.8 4400
Φ4.6×14m Center 2 15 90 30 4200 49.47 4000
Φ4.6×15.5m Center 2 15 125 30 3200 49.47 4800
Φ4.8×15.5m Center 2 14.68 155 30 3300 50.54 5500
Φ5×13.5m Center 2 14.5 280 30 3300 51.17 5500
Φ5×15m Center 2 14.5 150 30 3500 51.17 6300
Φ5×16.5m Center 2 14.5 180 30 3000 67.85 6300
Φ5×15.59m Center 2 14.5 °° °° °° °° °°
Φ5×20.43m Center 2 14.5 °° °° °° °° °°
Φ5.2×18m Edge 2 14 200 30 3500 9.5 8150

 

Air Swept Coal Mill (Ball Mill) Technical Parameter

 

Model Drive Manner Silo Amount Rotary Speed
r/min
Capacity
t/h
Feed Size
mm
Product Fineness
%
Main Gearbox Speed Ratio Main Motor Power
kW
Φ2.8×5.75+2.25m Edge 2+1 18.5 16 30 8~12 4.5 630
Φ2.8×6.25+2.25m Edge 2+1 18.5 22 30 6 4.5 630
Φ3.6×5.5+3.25m Edge 1+1 16.54 Coal26~29
Peltroleum Coke18~20
20 75µm-11
75µm-4
8.755 1470
Φ3.6×6.75+2.25m Edge 1+1 16.83 30 30 8~12 7.1 1250
Φ3.6×7+2.25m Edge 1+1 16.83 32 25 90µm-12,HGI55 7.1 1250
Φ3.8×7.5+3m Edge 1+1 16.26 33 20 10 7.1 1600
Φ3.8×7.75+3.5m Edge 1+1 16.7 40 20 88µm-3,HGI55 5.6 1400
Φ4.0×8.25+2.5m Edge 1+1 15.8 60 20 90µm-12 7.15 1800